ENTER TO WIN
Single Coil Strat™ Pickups
JOIN OUR MAILING LIST!
Loaded PickGuard SSS you pick color
List Price: $295.00
You save $45.00!
Usually Ships in 1 to 2 Weeks
.047uF PIO NewOldStockMilitary [Add $1.00]
.1uF PIO NewOldStockMilitary [Add $1.00]
Dunlope Pure Nickel 10's [Add $5.50]
Black '62 11 hole pattern B/W/B
Black 11 hole 3 ply BWB
Black 8 hole 1 ply B
Black Pearloid 11 hole BP,W,B [Add $12.00]
Cream 8 Hole 1 Ply
Cream Pearloid 11 hole 3 Ply PC,B,W [Add $12.00]
Mint Green '62 11 hole 3 ply MG,B,MG
Mint Green regular 11 hole 3 ply MG,B,MG
Parchment 11 hole 3 ply PBP
Parchment 8 hole 1 ply P
Parchment Pearloid 11 hole PP,W,B [Add $12.00]
Tortoise '62 11 hole 3 ply TWB [Add $10.00]
Tortoise 11 hole 3 ply TWB [Add $10.00]
White 11 hole 3 ply WBW
White 8 hole 1 ply W
White Pearloid 11 hole WP,W,B [Add $12.00]
Push/Push 7 way wiring [Add $12.00]
Standard 5 Way wiring
Solderless Connection Type [Add $3.00]
AP Allen Tru '62
JHBD1 JohnnyBlades [Add $130.00]
VP '69 VooDoo's
VP Hot 54/59
VP JM 60'sRocknBlues
VP TruVintage '54
Pickup Cover/Knob Color
Wishpot add this item to your
This is a Loaded Pick Guard your choice of color
.047 uF PIO Capacitor will be used these are New Old stock military PIO capacitors and extreemly high quality. A .033 uF or .1 uF PIO can be used if requested but we recommend the .047uF PIO.
1 5 way CRL switch or
+ ADD a 7 way with a push/pull or push/push pot. This will be placed in the lower Tone knob position so it will not effect your volume adjustments while playing. when in the up position on number 1 will add the neck to the bridge, in number 2 position will activate all three pickups. In the down position it will work like a standard strat.
1 switchcraft jack
1 Set of CS/VP Strat SSS Pickups Or
++ Add the JohnnyBlades **We will use 500K CTS pots on the volume and tone pots JohnnyBlades
3 cts 250K pots
+Add a wireless connector shown in photos a blue box that is hard soldered on one side and your side has three bays you just place the jack wires and ground wires in correct Bay and screw down until snug. They device is applied with a special vibration resistant tape so there are no mounting screw holes through the pick guard.
Loaded Pickguard with HSS set
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
ENTER TO WIN
Copyright © 2011 D Allen Pickups. All Rights Reserved.